RHSR-SS | Safety Railings
|
Babcock-Davis safety railing system for standard roof hatches with the ladder mounted on the opposite side of the hinge. Recommended for a standard 36" x 30" roof hatch, when the roof hatch is not located near the edge of the roof or near an obstruction. |
 |
|
| Product Characteristics |
|
| RHSR-SS SERIES | |
| Product Description: Babcock-Davis safety railing system for safe egress through roof hatches and for protection of roof opening while roof hatch is in open position. Meets OSHA Standard CFR 29 1910.23 and CFR 29 1910.27 | |
| Flat Bar: 2" x 3/8" thickness A36 mild steel | |
| Pipe: 1 ¼" ID A53 Grade B seamed steel | |
| Weld Filler: Metal NR211 E70XX (AWS) | |
| Finish: Hot dipped galvanized steel | |
| Chain System: 3/16" proof coil ASTM specification, zinc plated with quick links and 2 ½" zinc plated hoops on each end | |
| Pipe Caps: Weather and light resistant vinyl 1 ½" deep and fit snugly over pipe ends | |
| Bolts & Washers: Hex head bolts 3/8" x 2 ½" grade Z, zinc plated. Fender washers for inside of hatch curb and standard flat washers outside | |
| Railing Fittings: By Babcock-Davis | |
| Sealant for Brackets: Brackets shall be sealed per roof manufacturer's approved methods | |
| Labels: Safety "NO HOISTING" warning label, model and serial # label and manufacturer identification label | |
| Installer Certification: Systems must be installed by individuals holding a valid and current Certificate of Installation from Babcock-Davis | |
| Warranty: 7 year manufacturer's parts only warranty | |
| Manufacturer: BabcockDavis Minneapolis, MN 55413 (888)
412-3726 www.babcockdavis.com |
|
|
|
 |
|
